Cisco ONS 15310-MA SDH Procedure Manual page 18

Required Tools and Equipment
Note
Figure 1-8
Verify the 15310E-CTX-K9 card LED activity:
Step 2
The red FAIL LED turns on for 30 to 45 seconds. It then turns off for 5 seconds, and turns back on
a.
for 30 seconds.
The red FAIL LED blinks for 20 seconds, and turns off for 5 seconds.
b.
All LEDs turn on for 2 seconds.
c.
The ACT/STBY LED turns on. It is green if the card is active, or amber if the card is standby.
d.
When you log into CTC, verify that the card appears properly in CTC node view.
Step 3
As necessary, continue with the
Step 4
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, R9.0
1-18
The 15310E-CTX-K9 cards are hot-pluggable, which means they can be inserted or removed
without turning off the power to the ONS 15310-MA SDH.
Installing a 15310E-CTX-K9 Card
"NTP-H154 Install the Ethernet Cards" procedure on page
Chapter 1 Install the Cisco ONS 15310-MA SDH
1-19.
78-18668-01