Cisco ONS 15310-MA SDH Procedure Manual page 8

Chapter 1 Install the Cisco ONS 15310-MA SDH
Required Tools and Equipment
Figure 1-2 Installing the Extended Cable Management Bracket
Step 4 If you plan to install electrical interface assemblies (EIAs), continue with the "NTP-H166 Remove the
Blank Sheet Metal Covers" procedure on page 1-9 to access the backplane. If not, continue with the
"NTP-H151 Install the Power and Ground" procedure on page 1-12.
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, R9.0
1-8
78-18668-01