Cisco ONS 15310-MA SDH Procedure Manual page 27

Chapter 1 Install the Cisco ONS 15310-MA SDH
Complete the
Step 2
Complete the
Step 3
Complete the
Step 4
Stop. You have completed this procedure.
NTP-H159 Install and Remove SFPs
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Class 1 laser product. Statement 1008
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments. Statement 1051
Warning For copper SFPs, the Ethernet ports of ONS15310-MA SDH are intra-building ports and are suitable
only for connecting to cat-5 shielded (STP) cabling grounded at both ends. Statement 1084
Complete the
Step 1
Complete the
Step 2
Continue with the
Step 3
Stop. You have completed this procedure.
78-18668-01
"DLP-H259 Install DS-3/E3 Cables" task on page 18-64
"DLP-H260 Route Cables" task on page 18-65
"NTP-H159 Install and Remove SFPs" procedure on page
This procedure installs and removes SFPs. SFPs are hot-swappable
input/output devices that plug into SFP slots on the ONS 15310-MA SDH
faceplate to link the port with the fiber-optic network. SFPs are known as
pluggable port modules (PPMs) in CTC. You can preprovision the multirate
SFPs using the
task on page
SFPs appropriate to the ONS 15310-MA SDH. SFP types include STM1,
STM4, STM16, Ethernet, Gigabit Ethernet, and Fast Ethernet.
Refer to the "Card Reference" chapter in the Cisco ONS 15310-MA SDH
Reference Manual for SFP compatibility.
NTP-H151 Install the Power and Ground, page 1-12
As needed
Onsite
None
"DLP-H16 Install SFP Connectors" task on page 16-21
"DLP-H17 Remove SFP Connectors" task on page 16-22
"NTP-H160 Install Optical Cables" procedure on page
as needed.
"DLP-H192 Provision a Multirate Pluggable Port Module"
17-88.
Cisco ONS 15310-MA SDH Procedure Guide, R9.0
Required Tools and Equipment
as needed.
1-27.
as needed.
as needed.
1-28.
1-27