Removing Or Installing The Fdd Unit (Pl-Fd100) - Pro-face PL-6700 Series User Manual

3

Removing or Installing the FDD Unit (PL-FD100)

Raise Pinch Collar
3 - 6
Optional Units and Expansion Boards
Slide collar sideways
Cable End
1) Remove the floppy disk unit cover's
four attachment screws.
2) Around the FDD connection cable
is fitted a black plastic pinch col-
lar (Part of the PL's connector - see
detail 1, page 3-7).
This pinch collar must be pulled up
to release the connection cable's
end tab.
FDD Connector Cable
Pinch Collar
Remove FDD cable
3) Remove the cable end from the
FDD connector.
When either exchanging or installing
the PL-FD100, before screwing in the
unit's attachment screw, be sure that the
FDD Connection Cable is attached and
the abovementioned connector's pinch
collar is in place.
PL-6700 Series User's Manual