Installing The Pl; Installation Procedures - Pro-face PL-6700 Series User Manual

Optional Units and Expansion Boards

4-2 Installing the PL

1

Installation Procedures

Follow the steps given below when installing the PL-6700.
Confirm the moisture resistant seal's seating
Create a mounting hole
Mounting hole
To enhance the PL's maintainability, operability and ventilation, allow at least 50 mm or
more clearance between the PL and any other objects. (The clearance must be large
enough to allow you to insert or remove expansion boards and to attach connectors.)
PL-6700 Series User's Manual
Moisture resistant
seal
Rear
panel
Panel
1.6 - 10.0 mm
> <
> <
Side View
^
50mm
^
PL
50mm
^
50mm
^
Place the PL on a level surface with the dis-
play panel facing downward. Check that the
PL's moisture resistant seal is seated securely
into the seal's groove, which runs around the
perimeter of the panel's frame.
Create a hole for mounting the PL, like that
pictured here. These two items, the moisture
resistant packing and the mounting brackets are
required when installing the PL.
See "2-5 PL Dimensions"
• To obtain the maximum degree of
moisture resistance, be sure to mount
the PL on a smooth, flat surface.
• The panel itself can be from 1.6 to
10 mm thick.
Rear View
^
50mm
^
PL
50mm
^
^
50mm
50mm
4 - 3