Integrated Peripherals Setup - Pro-face PL-6700 Series User Manual

System Setup
6

INTEGRATED PERIPHERALS SETUP

Selecting INTEGRATED PERIPHERALS SETUP menu item displays the following screen.
Internal PCI/IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Burst Mode
IDE Date Port Post Write
IDE HDD Block Mode
Onboard FDC Controller
Onboard Serial Port1
Onboard Serial Port2
UART2 Mode
Onboard Parallel Port
Parallel Port Mode
■Internal PCI/IDE
■IDE Primary Master PIO
■IDE Primary Slave PIO
■IDE Burst Mode
■IDE Date Port Post Write
■IDE HDD Block Mode
PL-6700 Series User's Manual
ROM PCI/ISA BIOS(2A5IIU1C)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Primary
: Auto
: Auto
: DisabIed
: Enabled
: Enabled
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Normal
: 3BC/IRQ7
: Compatible
Designates the internal IDE port's setting. The two selections
available are [Disabled]or [Primary]. The [Primary] selection is
factory set and recommended for most users.
Designates the Master Drive's Operation Mode. Only after the
"Internal PCI/IDE" has been set to [Primary] can these IDE Primary
Master PIO settings be entered. The two selections available are
[Auto] or [Mode0] ‑ ‑ ‑ ‑ ‑ >[Mode4]. The [Auto] selection is factory set and
recommended for most users.
Designates the Slave Drive's Operation Mode. Only after the "Internal
PCI/IDE" has been set to [Primary] can these IDE Primary Slave PIO
settings be entered. The two selections available are [Auto] or
[Mode0] →[Mode4]. The [Auto] selection is factory set and
recommended for most users.
Only after the Internal PCI/IDE has been set to [Primary] can these
IDE Primary Slave PIO settings be entered. The two selections
available are [Disabled] or [Enabled]. The [Disabled] selection is
factory set and recommended for most users.
The two selections available are [Disabled] or [Enabled]. The
[Enabled] selection is factory set and recommended for most users.
Designates the Hard disk's Block Operation Mode. The two selections
available are [Disabled] or [Enabled]. The [Enabled] selection is
factory set and recommended for most users.
Com 3 & Com 4 Mode
Com 3 Port Resource
Com 4 Port Resource
ESC : Quit
F1 : Help PU/PD/+/-
F5 : Old Values (Shift)F2
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Enable
: 3E8/IRQ11
: 2E8/IRQ10
:Select Item
:Modify
:Color
5 - 11