Available Options And Expansion Boards - Pro-face PL-6700 Series User Manual

Chapter
3
The User can install a variety of optional units and expansion boards made by Digital in the
PL, as well as a number of commercially available ISA-bus compatible boards. This chap-
ter describes both the products that can be installed in the PL and how to install them.

3-1 Available Options and Expansion Boards

Digital Electrical Corporation Optional Products
DIM Module
HDD Unit
FFD Unit
FDD Unit
-5V/-12V
Power Unit
CD-ROM
Unit
Full-sized cover PL-FC200
IrDA Unit (under
development)
PL-6700 Series User's Manual
3-1 Available Options and Expansion Boards
3-2 Installing Options and Expansion Boards
Installing Optional Units
and Expansion Boards
Name Model
PL-EM220
PL-EM230
PL-HD200
PL-FF200
PL-FD200
PL-PW100
PL-DK200
PL-IR100
• Since the PL-6700's hard disk is a precision instrument, peri-
odic maintenance is recommended to insure its correct opera-
tion.
Description
32MB SDRAM Main memory
module for expansion.
64MB SDRAM Main memory
module for expansion.
Built-in type special purpose 2.5
inch HDD unit.
20MB flash file disk with IDE
interface.
PC/AT compatible 3.5 inch FDD
unit.
Provides -5V and -12V power to
the expansion slots. Allows each
of the 4 slots to draw up to
200mA.
IDE compliant CD-ROM unit
(Includes special connection
cable)
Attached when ISA bus full sized
board is used in the expansion
slot.
IrDA (Ver. 1.0) compatible infrared
data transmission module.
Installation Location
Installed inside the PL.
Installed inside the PL.
Used when replacing the
existing HDD unit.
Installed inside the PL.
Installed inside the PL.
Installed inside the PL.
Attached to the
connector on the rear
side of PL.
Installed inside PL's
Maintenance Cover.
Installed inside PL's IrDA
cover.
3 - 1