Wiring The Pl; Connecting The Power Cord - Pro-face PL-6700 Series User Manual

4-3 Wiring the PL

1

Connecting the Power Cord

(Rear of PL)
Power
Terminals
Power
Switch
To prevent electric shocks, be sure to turn the PL OFF before connecting the power cord.
To avoid the dangers of fire, electric hazards and equipment damage, be sure to use only
the specified power supply voltage when operating the PL-6700.
Use the following steps when connecting the power cord to the PL's power terminals.
Plastic Cover
4 - 6
Optional Units and Expansion Boards
WARNING
1) Confirm that the power switch is turned
Screw
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
L
N
1 2 3 4
1 2 3 4
FG
1 2 3 4
1 2 3 4
Power Input Terminals
Connecting these two termi-
nals provides 100V to 240V
L
AC power.
N
L= live and N= Neutral
(screw size: M3)
FG
This terminal is connected
to the PL's frame (chassis).
OFF. Then, remove the power terminal's
transparent plastic cover.
PL-6700 Series User's Manual