Table of Contents
Advertisement
5-2
System Parameters
1
STANDARD CMOS SETUP
Selecting the STANDARD CMOS SETUP menu item produces the following
screen.
Date (mm:dd:yy): Wed,Jul 2 1997
Time (hh:mm:ss): 14 : 50 : 3
HARD DISKS
Primary Master :Auto
Primary Slave
Drive A : 1.44M , 3.5 in.
Drive B : None
VGA Text Mode:Expansion
VGA Graphic Mode:Expansion
Floppy3 Mode Support:Disabled
LCD & CRT : Both
Halt On : All Errors
ESC
F1
■Date/Time
This data sets the PL's internal time and date.
Primary Master
This data sets the ISE hard disk's parameters. When this setting is set
to [AUTO], the hard disk's parameters are automatically read in. Also,
if the "IDE HDD AUTO DETECTION" is in use, the value entered
there is automatically set. The three options are [User],[Auto], or
[None]. The [Auto] setting is factory set and recommended for most
users.
■Primary Slave
The three options are [User],[Auto], or [None]. The [Auto] setting is
factory set and recommended for most users.
■DriveA
This setting determines the format used by the PL's internal floppy disk
drive.
The selection [1.44MB - 3.5in] is recommended. The other available
settings are [720K - 3.5in], [1.2M - 5.25in], [360 - 5.25in], [2.88M -
3.5in.], or [None]. The[1.44M - 3.5in] selection is factory set and
recommended for most users.
5 - 2
ROM PCI/ISA BIOS(2A5IIU1C)
TYPE SIZE CYLS HEAD PRECOMP
0
:Auto
0
:
Quit
:
Help
(Shift)F2
Hours
:00 - 23
Minutes
:00 - 59
Seconds
:00 - 59
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
0
0
0
0
0
0
Extended Memory : 31744K
:
Select Item
:
Change Color
System Setup
LANDZ
SECT0R
MODE
0
0
AUTO
0
0
AUTO
Base Memory :
640K
Other Memory :
384K
Total Memory : 32768K
PU/PD/+/- : Modify
PL-6700 Series User's Manual
Advertisement
Table of Contents
