Table of Contents
Advertisement
System Setup
Chapter
5
This chapter explains how to enter the PL-6700's system settings, as well as the cautions
required both before and during set up.
5-1 Setup Procedures
Normally, use only the factory (default) settings.
The following settings are those pre-set at the factory.
1)Connect the keyboard to the PL.
2)Turn the PL's power ON.
3)After the message "Press <DEL> to Enter SETUP"appears, press the [DEL]
key until the following screen appears.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC
:
F10
:
KEYBOARD ACTION KEYS
Provides a summary of the keyboard keys used to carry out the setup.
SYSTEM SETTING SELECTION AREA
Each of the titles (areas) listed here contains system setting items.
4) Use the arrow keys to move the cursor to the desired selection.
PL-6700 Series User's Manual
5-1
Setup Procedures
5-2
System Parameters
System Setup
ROM PCI/ISA BIOS(2A5IIUIC)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Quit
Save & Exit Setup
Time,DATE,Hard Disk Type •••
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item
(Shift)F2
:
Change Color
5 - 1
Advertisement
Table of Contents
