Basic Specifi Cations - SATO CG2 Series Quick Manual

Basic Specifi cations
Model name
Head density
(Resolution)
Printing method
Printing effective area 56 mm wide × 600 mm pitch
Label issuing
mode
Printing speed
Unprintable area
Paper type
Paper shape
Paper thickness
Label size
Outer diameter of
paper/Roll size
Ribbon size/
Ribbon type/
Ribbon winding
direction
Standard installed fonts
Bit map font
Kanji font
Rasterized font
Barcode
2D barcode
Composite symbol
CG208i̲E̲02.indd 29 CG208i̲E̲02.indd 29
CG208DT CG212DT
203 dpi 305 dpi
(8-dot/mm) (12-dot/mm)
Direct Thermal
Standard: Continuous mode, Tear off mode, Sensor off mode
Optional: Dispenser mode, Cutter mode
50, 75 or 100 mm/sec (Setting: 50, 75, 100)
2, 3 or 4 inches/sec (Setting: 2, 3, 4)
Label : Length direction Upper: 1.5 mm or less Lower: 1.5 mm or less
(Not including backing paper)
Width direction Left: 1.5 mm or less Right: 1.5 mm or less
(Not including backing paper)
Tag : Length direction Upper: 0.8 mm or less Lower: 0.8 mm or less
Width direction Left: 0.8 mm or less Right: 0.8 mm or less
Roll paper, fan-folded paper
Only use paper manufactured and/or specifi ed by SATO.
60 to 190μm (0.06 to 0.19 mm)
See page 31 for the label size.
Label: Maximum ø130 mm
Inner diameter of roll: ø40 mm (ø1.5 inches)
Wrist bands: Maximum ø110 mm
Inner diameter of roll: ø40 mm (ø1.5 inches)
Tag: Maximum ø250 mm
Inner diameter of roll: ø76 mm (ø3 inches)
* Use an external supply unit when setting a tag.
—
ANK font
XU, XS, XM, XB, XL, OCR-A, OCR-B
OCR-A (15×22) OCR-A (22×33)
OCR-B (20×24) OCR-B (30×36)
Supported by downloading one of the following kanji fonts.
1
Japanese (16×16, 22×22, 24×24/Kaku Gothic (JIS Std 1, 2, JIS X208))
2
Chinese (24×24 GB2312)
3
Korean (24×24 KSX1001)
CG Times, CG Triumvirate
UPC-A/UPC-E, JAN/EAN, CODE39, CODE93, CODE128, GS1-128
(UCC/EAN-128), CODABAR (NW-7), ITF, Industrial 2 of 5, Matrix 2 of 5,
BOOKLAND, MSI, POSTNET, GS1 DataBar (RSS)
QR Code, Micro QR, PDF417, Micro PDF, MAXI Code,
GS1 DataMatrix (ECC200)
JAN/EAN, UPC-A/UPC-E, GS1-128, GS1 DataBar (RSS)
CG208TT CG212TT
203 dpi 305 dpi
(8-dot/mm) (12-dot/mm)
Thermal Transfer (Direct Thermal/
Thermal Transfer)
56 mm wide × 400 mm pitch
Ribbon length: 50 m
Ribbon width: 59 mm
Winding direction: Face out
Ribbon winding method: Roll-wound
ribbon
OCR-A (15×22) OCR-A (22×33)
OCR-B (20×24) OCR-B (30×36)
29
2008/05/22 20:19:34 2008/05/22 20:19:34