Table of Contents
Advertisement
Keypad (Simple input device (Optional))
1 Turn on the printer while pressing the FEED/LINE button.
Continue pressing the FEED/LINE button until the ON LINE (POWER) lamp
blinks green.
2 Each time you press the FEED/LINE button, the ON LINE (POWER) lamp
indicator changes.
When using the keypad, check that the ON LINE (POWER) lamp is blinking
red.
3 Press the FEED/LINE button for at least three seconds to register the
connector type.
4 Check that the ON LINE (POWER) lamp is lit green, and then turn off the
printer. Turn on the printer again to activate the connector.
5 Connect the communication cable of the keypad to the RS-232C connector
on the printer. Check the orientation of the connector to be connected. While
bracing the printer with one hand, securely connect the cable of the keypad
to the printer.
The keypad (simple input device) can be used when the printer standard interface
is the USB + RS-232C type.
CG208i̲E̲02.indd 25
CG208i̲E̲02.indd 25
RS-232C connector
Communication cable
Keypad (Simple input device)
25
2008/05/14 10:09:44
2008/05/14 10:09:44
Advertisement
Table of Contents
