SATO CG2 Series Quick Manual page 30

Expansion Interface (Optional)
▲ Wireless LAN Interface
1 Turn on the printer while pressing the FEED/LINE button.
Continue pressing the FEED/LINE button until the ON LINE (POWER) lamp
blinks green.
2 Each time you press the FEED/LINE button, the ON LINE (POWER) lamp
indicator changes.
When using the wireless LAN connector, check that the ON LINE (POWER)
lamp is alternating between green and red.
3 Press the FEED/LINE button for at least three seconds to register the
connector type.
4 Check that the ON LINE (POWER) lamp is lit green, and then turn off the
printer. Turn on the printer again to activate the connector.
24
CG208i̲E̲02.indd 24 CG208i̲E̲02.indd 24 2008/05/14 10:09:43 2008/05/14 10:09:43