SATO CG2 Series Quick Manual page 18

Loading Roll Paper (Dispenser Type)
1
Pull the cover open/close latches on
both sides of the printer toward you to
unlock the top cover, and then open the
top cover 1.
2
Open the dispenser unit.
Dispenser bar Dispenser bar
Dispenser unit Dispenser unit
3
Remove the lead label leaving only the
backing paper, and load the paper in
the paper holder.
After pulling out the paper, pass the
paper through the paper sensor.
Pass the paper over the dispenser bar
so as to cover it.
Paper sensor Paper sensor
12
CG208i̲E̲02.indd 12 CG208i̲E̲02.indd 12
① ①
2008/05/14 10:09:01 2008/05/14 10:09:01