SATO CG2 Series Quick Manual page 16

Loading Fan-folded Paper (Continuous/Cutter Type)
1
Pull the cover open/close latches on
both sides of the printer toward you to
unlock the top cover, and then open the
top cover.
2
Pass the paper through the opened
window at the rear of the unit.
3
While holding the paper holder slide
lever, adjust the width of the paper
holder 1 to match the paper size.
After pulling out the paper, pass it
through the paper sensor.
When using a cutter type, place the
leading edge of the paper on top of the
platen roller.
Paper holder slide lever Paper holder slide lever
10
CG208i̲E̲02.indd 10 CG208i̲E̲02.indd 10
① ①
2008/05/14 10:08:54 2008/05/14 10:08:54
① ①