SATO CG2 Series Quick Manual page 22

Cutting Paper with Perforated Lines
For paper with perforated lines, cutting on or in front of the perforated lines is
prohibited. Cutting in those locations could cause the printer to malfunction.
If paper is cut at or before the perforation, use the Phillips tip of the
potentiometer adjustment screwdriver to adjust the potentiometer for the cut
position so that the paper is cut after the perforation.
The following items are specifi cations for paper that can be used by this printer,
so check them before using the printer.
1 Paper thickness (including the backing paper) is 0.06 to 0.16 mm. For
details, contact the store, dealer, or Support Center.
2 Cut accuracy is ±1.5 mm.
3 The cutter unit has a valid cut pitch of 25 to 603 mm (203 dpi)/25 to 403 mm
(305 dpi). However, the cut size may be restricted depending on the usage
conditions.
4 The perforated line +1 mm is the cut prohibited zone (Fig. 1).
5 The folded perforated line +4 to +25 mm of fan-folded paper is the cut
prohibited zone (Fig. 2).
6 After adjusting the stop position, dispense two to fi ve labels to fi x the cut
position.
Cut prohibited
zone
(Fig. 1)
16
CG208i̲E̲02.indd 16 CG208i̲E̲02.indd 16
Cut prohibited zone
Perforated line
Perforated line
25 mm
4 mm
Fold perforation
(Fig. 2)
2008/05/14 10:09:25 2008/05/14 10:09:25