SATO CG2 Series Quick Manual page 25

3
After setting the carbon ribbon in the
right side of the ribbon supply unit 1,
press the core guide 2.
Core guide Core guide
4
After setting the ribbon core in the right
side of the ribbon windup unit 1, check
that the projecting part on the printer is
securely inserted into the opening on
the roll. Next, press the core guide 2.
CG208i̲E̲02.indd 19 CG208i̲E̲02.indd 19
① ①
② ②
① ①
② ②
19
2008/05/14 10:09:30 2008/05/14 10:09:30