SATO CG2 Series Quick Manual page 19

4
Load the backing paper so that it sticks
out from the bottom of the dispenser
unit. If the paper is not taut, roll the
paper on the paper holder so that the
paper is taut.
Next, tightly close the dispenser unit by
pressing it in the direction of the arrow.
Output label Output label
Output backing paper Output backing paper
5
Close the top cover.
Press the top cover from above in the
direction of the arrows until it clicks into
position.
CG208i̲E̲02.indd 13 CG208i̲E̲02.indd 13
13
2008/05/14 10:09:06 2008/05/14 10:09:06