Connecting to a Computer
Standard Interface
▲ USB + LAN Type
1 Turn on the printer while pressing the FEED/LINE button.
Continue pressing the FEED/LINE button until the ON LINE (POWER) lamp
blinks green.
2 Each time you press the FEED/LINE button, the ON LINE (POWER) lamp
indicator changes.
When using the USB connector, check that the ON LINE (POWER) lamp is
alternating between green and red.
When using the LAN connector, check that the ON LINE (POWER) lamp is
blinking green.
3 Press the FEED/LINE button for at least three seconds to register the
connector type.
4 Check that the ON LINE (POWER) lamp is lit green, and then turn off the
printer. Turn on the printer again to activate the connector.
22
CG208i̲E̲02.indd 22
CG208i̲E̲02.indd 22
LAN connector
USB connector
2008/05/14 10:09:41
2008/05/14 10:09:41