Table of Contents
Advertisement
8.6
IP CONFIGURATION
In the treemap on the left of the GUI, expand the Configuration
Enter the IPv4 address and Mask Length in the table.
Choose the management VLAN ID to access that IP in VLAN table if VLAN function is required.
If multiple IP addresses are required, click Add Interface to add more IP interfaces.
Click Save to save the configuration.
Use new IP address to access the switch.
PS: All configuration changes must be saved otherwise all the changes will be lost after
rebooting!
PAGE 14
OPTICAL SYSTEMS DESIGN
OSD2892 QUICK START GUIDE
System
IP.
DOC ID: 10118602
Advertisement
Table of Contents
