4.
Connect the ground wire (G) to the ground terminal (A) using one of the remaining
provided screws (C). Connect the other end of the ground wire (G) to the ground
terminal and installation hole on the option using the last remaining provided screw
(C) and tighten both screws to 0.5 to 0.6 Nm (4.4 to 5.3 inlb).
Figure 15
5.
Wire the communication cables.
Note: Separate communication cables from main circuit wiring and other electrical lines.
YASKAWA ELECTRIC TOBP C730600 91D YASKAWA AC Drive Option SI-EM3 Installation Manual
G
Figure 15 Connecting the Ground Wire
5 Installation Procedure
A1000
A
C
31