YASKAWA SI-EM3 Installation Manual page 30

5 Installation Procedure
3.
Make sure the screws on the left and right sides of the option terminal block (H) are
tightened with a tightening torque of 0.5 to 0.6 Nm (4.4 to 5.3 inlb), then insert the
option (B) into the CN5 connector (J) located on the drive and fasten it using one of
the included screws (C).
Figure 14
J
30
H
Figure 14 Insert the Option
YASKAWA ELECTRIC TOBP C730600 91D YASKAWA AC Drive Option SI-EM3 Installation Manual
A1000
B
C