YASKAWA SI-EM3 Installation Manual page 21

Procedure A
n
This section shows the procedure to install and wire the option on a 1000-series drive.
Prepare the Drive for the Option
1. Correctly wire the drive as specified by the manual packaged with the drive.
2. Make sure that the drive functions correctly.
Refer to Figure 4
for reference in the installation procedure.
Figure 4
N
M
L
K
A – Insertion point for CN5 connector
B – SI-EM3 option
C – Drive front cover
D – Keypad
E – LED label
F – Drive terminal cover
G – Removable tabs for wire routing
H – Included screws
I – Ground wire
YASKAWA ELECTRIC TOBP C730600 91D YASKAWA AC Drive Option SI-EM3 Installation Manual
for an exploded view of the drive with the option and related components
A
J
I
H
G
Figure 4 Drive Components with Option
5 Installation Procedure
C
B
F
J – Option modular connector CN1
K – Drive grounding terminal (FE)
L – Connector CN5-A
M – Connector CN5-B
(Not available for communication
option installation.)
N – Connector CN5-C
(Not available for communication
option installation.)
A1000
D
E
NS MS
21