YASKAWA SI-EM3 Installation Manual page 43

No.
Name
(Hex.)
F7-08
(03EC)
Subnet Mask 4
<8>
F7-09
Gateway Address
(03ED)
1
<8>
F7-10
Gateway Address
(03EE)
2
<8>
F7-11
Gateway Address
(03EF)
3
<8>
F7-12
Gateway Address
(03F0)
4
<8>
F7-13
Address Mode at
(03F1)
Startup
<8>
F7-14 Duplex Mode
(03F2) Selection
F7-15
Communication
(03F3)
Speed Selection
<12> <13>
F7-16
Timeout Value
(03F4)
Communications
H5-11
ENTER Function
(043C)
Selection
YASKAWA ELECTRIC TOBP C730600 91D YASKAWA AC Drive Option SI-EM3 Installation Manual
Sets the static/fixed Subnet Mask.
Parameter F7-08 sets the fourth most significant octet.
Sets the static/fixed Gateway address.
Parameter F7-09 sets the most significant octet.
Sets the static/fixed Gateway address.
Parameter F7-10 sets the second most significant octet.
Sets the static/fixed Gateway address.
Parameter F7-11 sets the third most significant octet.
Sets the static/fixed Gateway address.
Parameter F7-12 sets the fourth most significant octet.
Selects how the option address is set.
0: Static
<11>
1: BOOTP
2: DHCP
Selects duplex mode setting.
0: Half/Half
1: Auto/Auto
2: Full/Full
3: Half/Auto
4: Half/Full
5: Auto/Half
6: Auto/Full
7: Full/Half
8: Full/Auto
Sets the communication speed.
10: 10/10 Mbps
100: 100/100 Mbps
101: 10/100 Mbps
102: 100/10 Mbps
Sets the detection time for a communications timeout.
Note: Set this parameter to 0.0 to disable the connection timeout
function.
Selects whether an Enter command is necessary to change
parameter values via MEMOBUS/Modbus communications.
0: Parameter changes are activated when ENTER command is
written
1: Parameter changes are activated immediately without use of
ENTER command
6 Related Drive Parameters
Description Values
Default: 0
Min: 0
Max: 255
Default: 192
Min: 0
Max: 255
Default: 168
Min: 0
Max: 255
Default: 1
Min: 0
Max: 255
Default: 1
Min: 0
Max: 255
Default: 2
Range: 0 to 2
Default: 1
Range: 0 to 8
Default: 10
Range: 10 to 102
Default: 0.0 s
Min: 0.0 s
Max: 30.0 s
Default: 0
<14>
Range: 0, 1
43