YASKAWA SI-EM3 Installation Manual page 27

Procedure B
n
This section shows the procedure to install and wire the option on a Z1000 Drive.
Prepare the Drive for the Option
Prior to installing the option, wire the drive, make necessary connections to the drive
terminals, and verify that the drive functions normally without the option installed. Refer to
the User Manual packaged with the drive for information on wiring and connecting the
drive.
Figure 11 shows an exploded view of the drive with the option and related components for
reference.
Figure 11
J
A – Drive grounding terminal (FE)
B – Option card
C – Mounting screw
D – Drive front cover
E – HOA keypad
YASKAWA ELECTRIC TOBP C730600 91D YASKAWA AC Drive Option SI-EM3 Installation Manual
I
H
G
Figure 11 Drive Components with Option
5 Installation Procedure
A1000
A
B
C
D
MS
NS
F – LED label
G – Ground wire
H – Terminal block CN1
I – Insert connector CN5 here
J – Connector CN5
E
F
27