YASKAWA SI-EM3 Installation Manual page 23

2.
Affix the LED label (E) in the appropriate position on the drive front cover (C).
Figure 6
3.
Insert the option card (B) into the CN5-A (L) connector on the drive and fasten it into
place using one of the included screws (H). Tighten the screw to 0.5 to 0.6 Nm (4.4
to 5.3 inlb).
Figure 7
L
YASKAWA ELECTRIC TOBP C730600 91D YASKAWA AC Drive Option SI-EM3 Installation Manual
Figure 6 Affix the LED Label
Figure 7 Insert the Option
5 Installation Procedure
A1000
C
NS MS
A1000
B
H
E
23