Unpacking; Switch And Jumper Settings - Advantech PCIE-1765 User Manual

2.1

Unpacking

After receiving your PCIE-1765 card, please inspect the contents before installation.
The package should contain the following items:
 1 x PCIE-1765 card
 1 x PCIE-1765 startup manual
2.2

Switch and Jumper Settings

The PCIE-1765 card has a single function switch setting.
Figure 2.1 Card connector, jumper, and switch locations
Table 2.1: Summary of Jumper Settings
Names of Jumpers
JP2
Setting the Time to Reset the Relay Outputs
Users may want the ability to clear each relay output when the system (or PC) issues
a reset signal on the PCIE bus or to clear relays only as part of a system bootup. The
PCIE-1765 card satisfies both of these needs with the provision of jumper JP2.
Depending on the application, this may allow relay outputs to be configured as "OFF"
without requiring a complete shutdown of card-controlled processes.
PCIE-1765 User Manual
Function Description
Do not retain the last status after
hot reset (default)
Retain the last status after a hot
reset
6