Dip Switch Information - Planet IPOE-470 User Manual

 802.3bt PoE++ TP Interface LEDs
LED Color
802.3bt
PoE++ Amber
PoE-in-Use

3.2 DIP Switch Information

To meet the demand of various powered devices consuming stable PoE power,
the PoE++ Injector Hub provides one DIP switch for two PoE operation mode
options as shown in the following table.
PoE Mode
802.3bt
The Standard mode is to provide power to the PD device that
(Default)
follows the IEEE 802.3af/at/bt standard.
The Legacy mode supports Ultra PoE. It is to provide power to
Legacy the PD devices that do not fully follow the IEEE 802.3af/at/bt
standard.
The IPOE-470 series also supports Force Power Mode in the
Legacy mode. If the output power of IPOE-470 series in the
Legacy Mode is less than 1 watt for 20 seconds, the Force Mode
will be enabled for 2 seconds. If the loading is still less than 1
watt, the Legacy Mode will be enabled again.
8
Lights to indicate that the port is providing PoE in-line
power to remote powered device.
Off to indicate that the port is not providing PoE in-line
power to remote powered device.
P1 P2 Alarm
160W 240W
80W
ON OFF
PoE
Mode
Legacy BT
Function
PoE
Usage
Description