Display Machine Control Software Version; Resetting Jobs To Status On Delivery (Reset All) - EWM alpha Q 352 puls MM Operating Instructions Manual

7.4

Display machine control software version

The query of the software versions only serves to inform the authorised service staff!
0
l
Display
The printed circuit boards and software versions shown are displayed in an automated
process and vary according to the components that are connected and the versions.
7.4.1

Resetting JOBs to status on delivery (Reset ALL)

Operating
element
099-005366-EW501
31.07.2014
ENTER
A
+
Setting/selection
List of the software
Start of the automated process
Software versions display
------- = System bus ID/printed circuit board
0.0.0.0.= Version number
System bus ID/printed circuit board and version number are separated by a colon.
List of the software
End of the list of software versions
Action Result
Select Res. All using the buttons
"Down" (left).
Display machine control software version
NOTE
Figure 7-1
NOTE
"Up" and
Rectifying faults
0
l
Display
Res. All 1
79