Dmx Mode; Slave Mode; Static Settings - Blizzard Lighting Cyc Out User Manual

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
Set the Starting DMX Address:
1.) Navigate the menu using the <MENU> button until you reach ADDR.
2.) Use the <UP/DOWN> buttons to select a DMX channel from 001-512.
3.) Press the <ENTER> button to confirm.
Select the DMX Channel Mode:
1.) Navigate the menu to reach SET, then press <ENTER>.
2.) Then use the <UP/DOWN> buttons to highlight CHMD, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to select 4CH, 5CH, 8CH, 10CH, 15CH, 16CH, or 28CH.
4.) Press the <ENTER> button to confirm.

Slave Mode:

1.) Daisy chain the fixtures DMX in/out, having the controller at the beginning of the line.
2.) There is nothing else to it! The first fixture in the DMX chain is the master fixture, and the
following fixtures will follow the master.

Static Settings:

Create custom colors with individual R/G/B/W level and strobe settings.
Intensity:
1.) Navigate the menu to reach STAT, then press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight MAST INT (master intensity), R INT (red
intensity), G INT (green intensity), B INT (blue intensity), W INT (white intensity), and press
the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select adjust the intensity level from 0-255.
4.) Press the <ENTER> button to confirm.
Strobe:
1.) Navigate the menu to reach STAT, then press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight any R/G/B/W DURA (duration) setting, and
RATE (time) setting, and press the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select adjust the intensity level from 0-255.
4.) Press the <ENTER> button to confirm.
Duration Time/Rate Time (Period) Relation:
Cyc Out™ User Manual Rev. D
Light
Dark
Duration < Period (Rate) = Flashing
Duration >= Period (Rate) = Light Continuously ON
Page 12
© 2017 Blizzard Lighting, LLC