Control Panel Menu Structure; Dmx Mode; Master/Slave Mode; Extended View Mode - Blizzard Lighting Solar Ray User Manual

Control Panel Menu Structure

DMX Address
DMX CH Mode
Auto Mode
Slave Mode
Sound Mode
Network Settings

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
Change the Starting DMX Channel:
1.) The default DMX channel appears as 001 on the LCD readout. To select a different starting
DMX channel, use the <UP/DOWN> buttons to navigate to DMX Address, and press the
<ENTER> button. Then use the he <UP/DOWN> buttons to select a value ranging from 001-
512, and press the <ENTER> to confirm your choice.
Setting the DMX Channel Mode:
1.) To select a DMX channel mode, use the <UP/DOWN> buttons to navigate to DMX CH
Mode, and press the <ENTER> button. Then use the <UP/DOWN> buttons until the display
reaches your desired channel mode. Press the <ENTER> button to confirm.
Slave Mode:
1.) To set a fixture to run in slave mode, use the <UP/DOWN> buttons to navigate to Slave
Mode, and press the <ENTER> button. Then use the <UP/DOWN> buttons to highlight
either Yes or No. Press the <ENTER> button to confirm your choice.
Network Settings:
Set multiple units to run extended patterns via Net Subnet Universe value settings.

Extended View Mode:

1.) While in master/slave mode, to run extended patterns between multiple fixtures; set the
Net Subnet Universe setting of each fixture to have a different value: ex., for 9 fixtures use the
values 01-09. In contrast, matching Net Subnet Universe values will result in identical/individual
patterns that will not extend the view between the group of fixtures.
Stand-Alone, & Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Auto Mode:
1.) To run any of the fixture's individual programs or all of them in "Mix Mode", use the <UP/
DOWN> buttons to navigate to Auto Mode, and press the <ENTER> button. You can then
adjust the speed setting from 1-9 (slow <-> fast), or press the <UP/DOWN> buttons to
navigate to Program to select any of its 29 programs, or Mix Mode to cycle through them all.
Press the enter button to confirm your choice.

Sound Active Mode:

1.) To use sound active mode, select Sound Mode from the main menu then press the
<ENTER> button. Sound active will now be actively running, using the currently set auto
program or Mix Mode.
Solar Ray™ User Manual Rev. A
001-512
6CH
25CH
Speed
Program
Yes/No
Yes/No
IP Address
Subnet Mask
Net Subnet Unive
Page 11
To choose the DMX address
6-channel DMX mode
25-channel DMX mode
Speed adjustments (1-9)
Built-in programs (1-29) + Mix Mode
Sets fixture to run in slave mode
Sound active mode
IP address settings
Subnet mask settings
Net subnet universe settings
© 2015 Blizzard Lighting, LLC