Dmx Channel Values In-Depth; Troubleshooting - Blizzard Lighting LB Bar CSI User Manual

DMX Values In-Depth (3-Channel Mode)
Channel
1
2
3
DMX Values In-Depth (1-Channel Mode)
Channel
1

Troubleshooting

Symptom
Beam is Dim
No Light Output
Chase Speed Too
Fast/Slow
No Power
Blown Fuse
No Response to
Audio
Fixture Not Re-
sponding / Respond-
ing Erratically
If your problem persists or isn't listed, please open a support ticket
LB™ Bar CSI User Manual Rev. A
Value
000 <--> 255
000 <--> 005
006 <--> 055
056 <--> 105
106 <--> 155
156 <--> 205
206 <--> 255
000 <--> 020
021 <--> 040
041 <--> 060
061 <--> 080
081 <--> 100
101 <--> 255
Value
000 <--> 255 UV Intensity (0% <--> 100%)
Solution
Check optical system and clean excess dust/grime.
Check to ensure fixture is operating under correct
mode.
Check to ensure proper setup of speed adjustment.
Check fuse, AC cord and circuit for malfunction.
Check AC cord and circuit for damage, verify that
moving parts are not restricted and that unit's ventila-
tion is not obstructed
Sound Active mode is not equipped with this fixture.
Make sure all connectors are seated properly and
securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fixture(s).
online at: www.blizzardlighting.com/support.
What It Does
UV Intensity (0% <--> 100%)
Strobe
No Function
Random Strobe
Pulse Strobe
Average Strobe
Thunder Strobe
Standard Strobe
Dimming Curves
Standard Curve
Dimming Curve 1
Dimming Curve 2
Dimming Curve 3
Dimming Curve 4
No Function
What It Does
Page 13
© 2017 Blizzard Lighting, LLC