Adding A Participant To No Hold Conference; Parking And Unparking A Call - Avaya J129 Instructions Manual

Advanced features

Adding a participant to no hold conference

About this task
You can add participants to your call while continuing your conversation without interruption. You
can add up to six participants in the no hold conference call.
Before you begin
Ensure that the administrator has activated the no hold conference feature, and you are on an call.
Procedure
1. During an active call, on the phone screen, Press Main menu > Features.
2. Press No Hold Conf.
3. You can add users to a no hold conference by using one of the following methods:
• If an extension number is pre-configured by your administrator, you can press Select.
• If the extension number is not pre-configured, you will get a Dial screen to enter the
extension number, press OK.
4. To add more participants to the existing no hold conference, repeat Steps 2 and 3.
Related links
Handling calls and conferences using Multiple Device Access

Parking and unparking a call

About this task
Use this procedure to park the active call and answer the call from another extension.
This feature is only available in the Avaya Aura
Your system administrator must activate the feature for your extension.
In the IP Office environment, this feature is supported using short code dialing. Contact your
system administrator for the list of short codes.
Procedure
1. While on an active call, press Main menu > Features.
2. Use the Down Arrow key to go to the Call Park screen.
3. Press Select or OK.
The phone parks the call.
4. To answer a parked call, press Main menu > Features.
January 2020
®
environment.
Using Avaya J129 IP Phone SIP
Comments on this document? infodev@avaya.com
on page 23
44