Managing Conference Calls; Adding A Person To An Active Call; Adding A Person On Hold To A Conference Call - Avaya J129 Instructions Manual

Call related features
Procedure
Press Hold button to resume the held call.
When you have multiple held calls and you are on the phone screen, pressing the hold button will:
• Resume the highlighted held call, if the held call is highlighted
• Resume the last held call, if there is no highlighted held call
If you are not on the phone screen, pressing hold button will:
• Resume the last held call
• Redirect you to the phone screen, and cancel any other action on the user input menu

Managing conference calls

Adding a person to an active call

About this task
You can add participants to an active call to set up a conference call.
Before you begin
Start a call.
Procedure
1. During a call, on the Phone screen, press More > Conf.
The phone puts the existing call on hold.
2. To make a call to a participant, do one of the following:
• Dial the phone extension by using the dial pad.
• Call the person from the Contacts list or the Recents list.
3. When the third participant answers the call, press the Join soft key.
4. To add another person, press Add and repeat Steps 2 and 3.

Adding a person on hold to a conference call

About this task
Use this task to add a person that you have put on hold to a conference call.
January 2020 Using Avaya J129 IP Phone SIP
Comments on this document? infodev@avaya.com
32