Placing A Call On Hold; Managing Conference Calls; Adding A Person To An Active Call; Adding A Person On Hold To A Conference Call - Avaya IP OFFICE J139 User Manual

PLACING A CALL ON HOLD

1. To put an active call on hold, press Hold
2. To resume the call, press one of the following:
• Resume
• OK

MANAGING CONFERENCE CALLS

ADDING A PERSON TO AN ACTIVE CALL

Use this procedure to add participants to an active call to set up a
conference call
1. Start a call
2. During the call, on the phone screen, press More > Conf
• The existing call will be put on hold
3. To make a call to a participant, do one of the following:
• Dial the phone number by using the dial pad
• Call the person from the Contacts list or the Recents list
• Redial the last dialed number by using the Redial softkey
4. When the third participant answers the call, press the Join softkey
5. To add another person, press Add and repeat Step 2 and 3

ADDING A PERSON ON HOLD TO A CONFERENCE CALL

1. In the Phone screen, select your active call
2. Press Conf or Add if you are already in a conference
3. Select the call on hold that you want to add to the conference
4. Press Resume to take the call off hold
5. Press one of the following:
• Join
• Conf
9