Safety Notes; General Safety Notes - Leica DMi1 Instructions For Use Manual

3. Safety Notes

3. Safety Notes

3.1 General Safety Notes

This product of protection class 1 is built and
inspected in accordance with IEC / EN61010-1 -
Safety requirements for electrical equipment for
measurement, control and laboratory use - and
IEC / EN 61010-2-101
It also meets the EMC-standards IEC / EN 61326-1
and IEC / EN 61326-2-6 for electrical equipment
for measurement, control and laboratory use and
particular requirements for IVD-Medical Devices
and corresponds to the CE Directives.
It fulfills IEC / EN 62471, Photobiological safety of
lamps and lamp systems. This product is classi-
fied according to this into the exempt level (no
risk).
10
Caution!
In order to maintain this condition and to en-
sure safe operation, the user must follow the
instructions and warnings contained in this
instructions for use.
Caution!
The devices and accessories described in
this instructions for use have been tested for
safety and potential hazards.
The responsible Leica affiliate or the main
plant in Wetzlar must be consulted whenever
the device is altered, modified or used in con-
junction with non-Leica components that are
outside of the scope of this instructions for
use .
Unauthorized alterations to the device or
noncompliant use shall void all rights to any
warranty claims and product liability!