Extron electronics CrossPoint 300 Series User Manual page 30

im Vertrieb von
Operation, cont'd
4.
1
= Blinking LED
Figure 3-7 — Select the outputs
5.
Figure 3-8 — Press the Enter button
Figure 3-9 — Example 1, final configuration
www.camboard.de
3-10 CrossPoint 300 Matrix Switchers • Operation
CAMBOARD Electronics
Press and release the output 3, output 4, and output 8 buttons (figure 3-7).
The entire set of ties can be canceled at this point by pressing and releasing the
Esc button. The Esc LED flashes once.
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink to indicate that the selected RGBHV and
audio input will be tied to these outputs.
2 3 4 5
OUTPUTS
Press and release the Enter button (figure 3-8).
Press the Enter button to confirm
the configuration change.
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
ENTER
The current configuration (figure 3-9) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
5
3
Output
4
8
Tel. 07131 911201
Fax 07131 911203
ENTER PRESE
The Enter LED blinks to indicate
6 7 8
the need to confirm the change.
Video
Audio
ce-info@camboard.de