Windows Buttons, Drop Boxes, And Trash; Windows Menus; File Menu; Tools Menu - Extron electronics CrossPoint 300 Series User Manual

im Vertrieb von

Windows buttons, drop boxes, and trash

Windows menus

File menu

Tools menu

www.camboard.de
CAMBOARD Electronics
The buttons, drop boxes, and trash can on the right side of the
program window perform the following functions:
Power — Unavailable for these switchers.
Executive mode — Allows you to lock out front panel operations,
except for the view-only mode functions.
Presets menu — Displays a list of up to 16 global presets. You can
select a preset from the list to display it in the window and
either activate it (Go) or delete it (Delete).
Go — Activates the selected preset as the current configuration.
Save as — Allows the current set of ties to be saved as a preset. Enter
the preset number when prompted to do so.
Changes – Take — Allows you to save to file any changes made to
the displayed configuration.
Changes – Cancel — Returns to the previous screen, undoing any
changes you have made.
Trash can — Drag and drop from an input or output button to the
trash to unmake all ties associated with that input or output.
Save matrix settings as — Saves a complete set of up to 16
presets, plus the last active setting (preset #0), to a
file. Saved settings include audio gain settings (if
specified), assigned icons, and icon captions.
Restore matrix settings from — Loads and activates a
previously saved setting file.
Save this-session's settings — Saves the current assigned icons and icon captions.
Restore last-session's settings — Loads the icons and icon captions that were
saved during the last session. If you saved the previous session's changes to
disk the last time you exited the program, the ties from that session are also
loaded.
Select printer — Selects the target printer.
Print tie map — Prints the tie set that is displayed on the screen.
Exit — Closes the Matrix Switcher+ Control Program.
Assign device icons — Displays the complete set of input and
output device icons. You can drag any of these icons to
the input and output boxes.
Edit device palette — Allows you to add your own device icon
graphics.
Audio-Input gain settings — Displays the audio gain level
setting for a single input or for all inputs and allows you
to change it. The level is expressed as the magnitude
(number of decibels) and polarity (positive, gain or
negative, attenuation) of the audio adjustment.
Tel. 07131 911201
CrossPoint 300 Matrix Switchers • Matrix Software
Fax 07131 911203
ce-info@camboard.de
5-7