Attach Roof Assemblies To Fort - KidKraft F24930 Installation And Operating Instructions Manual

Step 51: Attach Roof Assemblies to Fort
Part 1
A: With 2 people on the ground and at least 1 person in the fort, lift one Small Roof Assembly up and over the
Back side of the fort . Guide the Small Roof Assembly onto the fort so it slides under one of the Mid Roof Support
Assemblies and the (2788) Mid Roof Supports sit tight to the siding on the Small Roof Assembly . The front of the
Small Roof Assembly should be flush to the front of each (2646) Roof End and (2647) Roof End Left. (fig. 51.1
and 51 .2)
B: Attach Small Roof Assembly to Mid Roof Support Assembly from inside with 3 (S2) #8 x 1-1/2" Wood Screws
per side. Screws to go into (2788) Mid Roof Supports. (fig. 51.2)
C: Repeat Steps A and B for the second Small Roof Assembly .
Fig. 51.1
Small Roof
Assembly
Flush
Fig. 51.2
Mid Roof
Support
Assembly
Tight
2788
S2
Hardware
12 x
S2
2788
x 3 per side per
Roof Assembly
#8 x 1-1/2" Wood Screw
93
Small Roof
Assembly
Small Roof
Assembly