Nice AVIO600 Instructions And Warnings For Installation And Use page 39

3.3.6 – FL200 flashing light (optional)
• The flashing light must be positioned near the door in a clearly
visible position. It can be fasted to a horizontal or vertical surface.
• For connection to the Flash terminal, no polarity needs to be observed;
instead for connection of the shielded aerial cable, it is necessary to con-
nect the cable and sheath as shown in Fig. 46(06) and Fig. 65.
Choose the most suitable position in
must be positioned near the door in a clearly visible position. It can be
fasted to a horizontal or vertical surface.
For the installation procedure see Fig. 46.
01.
2
1
05. A
05. B
06.
12 – English
hich to install the ashing light: it
02. 03.
Ø = 6 mm
07.
(flash) (aerial)
04.
x4
x4
Ø = 6 mm
08.
1
09.
2
46