Nice AVIO600 Instructions And Warnings For Installation And Use page 33

3.1.1 – Operating Limits
Chapter 6 "Technical Characteristics" provides the fundamental data
needed to determine whether all the AVIO600 and AVIO1000 compo-
nents are suitable for the intended application. In general AVIO600 and
AVIO1000 are suitable for the automation of sectional and overhead
Model Maximum force
AVIO600
600N
AVIO1000 1000N
3.1.2 – Tools and Materials
Make sure you have all the tools and materials needed to install the system; make sure that they are in good condition and service-
able according to current safety standards. See examples in figure 12.
12
3.1.3 – List of cables
The cables required for the installation of AVIO may vary depending on the type and quantity of devices to be installed; figure 13 sho s the cables
needed for a typical installation; no cable is supplied with AVIO.
13
E
D
B
A
C
6 – English
doors for residential applications having the values shown in the table 7.
The shape of the door and the climatic conditions (e.g. presence of strong
wind) may reduce this maximum limit. In this case it is necessary to mea-
sure the torque needed to move the door under the worst conditions, and
to compare it to the data provided in the technical characteristics chart.
TABLE 7
SECTIONAL door
Height Width
2,4m 4,4m
3,4m 5,2m
OVERHEAD door
non-protruding (with GA2)
Height Width
2,2m 4,2m
3,2m 5m
C
OVERHEAD door
protruding (with GA2)
or with springs (without GA2)
Height
2,8m
3,5m