Nice AVIO600 Instructions And Warnings For Installation And Use page 53

CE declaration of conformity and declaration of incorporation for a
"quasi-machine"
Declaration in accordance with Directives: 1999/5/EC (R&TTE), 2014/30/EC (EMC); 2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to the declaration made in the official document filed in the offices of Nice
S.p.a., and particularly the latest version thereof available prior to the printing of this manual. The text herein has been re-edited
for editorial purposes. A copy of the original declaration can be requested from Nice S.p.a. (TV) IT.
Number: 582/AVIO
Name of manufacturer: Nice s.p.a.
Address: Via Pezza Alta 13, 31046 Rustignè, Oderzo (TV) Italy
Person authorised to provide technical documentation: Nice s.p.a.
Product type: Gearmotor 24Vdc assembled, with incorporated control unit and receiver
Model / Type: AVIO500C, AVIO600C, AVIO1000C, AVIO500CC
Accessories: GA2, GU2, PR100, KS200KIT, ECCO5BO, ECCO5WO
The undersigned Roberto Griffa, as Chief Executive Officer, hereby declares under his own responsibility that the products speci-
fied above comply with the provisions of the following directives:
• DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 9 March 1999 regarding radio equipment and
communications terminals and the mutual recognition of their conformity in accordance with the following harmonised stand-
ards:
- Health and safety: EN 62479:2010
- Electrical safety: EN 60950-1:2006 + A11:2009 + A12:2011 + A1:2010 + A2:2013
- Electromagnetic compatibility: EN 301 489-1 V1.9.2:2011; EN 301 489-3 V1.6.1:2013
- Radio spectrum: EN 300 220-2 V2.4.1:2012
• DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmoni-
sation of the laws of the Member States relating to the making available on the market of electrical equipment designed for
use within certain voltage limits (recast), according to the following standards: EN 60335-1:2002 + A1:2004 + A11:2004 +
A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011; EN 60335-2-95:2015 + A1:2015, EN 62233:2008
The product also complies with the following directive in accordance with the requirements for "quasi-machines":
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and amending
directive 95/16/EC (consolidated text)
• I declare that the pertinent technical documentation has been prepared in accordance with Annex VII B to Directive 2006/42/
EC and that the following essential requirements have been met: 1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 - 1.2.6 - 1.5.1 - 1.5.2 - 1.5.5 -
1.5.6 - 1.5.7 - 1.5.8 - 1.5.10 - 1.5.11
• The manufacturer agrees to send the national authorities pertinent information on the "quasi-machine" in response to a moti-
vated request without affecting its intellectual property rights.
• If the "quasi-machine" is operated in a European country with an official language other than the language used in this declara-
tion, the importer must associate a translation with this declaration.
• The "quasi-machine" must not be operated until the final machine in which it is to be incorporated is declared to conform to
the provisions of Directive 2006/42/EC, if applicable to it.
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003 + A1:2011; EN 12445:2000; EN 12453:2000; EN 12978:2003 + A1:2009
Oderzo, 28 July 2016
28 – English
Revision: 0 Language: EN
ANNEX 2
Eng. Roberto Griffa
(Chief Executive Officer)