Introduction; Compatibility - Humminbird MEGA 360 IMAGING Series Installation Manual

Introduction

This manual will guide you through the following installation requirements for the
MEGA 360 Imaging transducer:
• Installing the Trolling Motor Bracket
• Connecting to the Control Head and Power
• Testing the Installation
• Powering Off
Before proceeding with this installation, the Humminbird control head
and Minn Kota trolling motor should be installed. The MEGA 360
Imaging transducer can be connected directly to the control head or to
a Humminbird Ethernet Switch (optional) for networking.

Compatibility

Control Heads: MEGA 360 Imaging is compatible with SOLIX Series and HELIX
Series fish finders equipped with MEGA Imaging+ and can be mounted on
Minn Kota Ultrex, Fortrex, and Maxxum bow-mount trolling motors.
MEGA 360 Imaging Minn Kota Trolling Motor Humminbird Fish Finder
MEGA 360 Ultrex
MEGA 360 Fortrex
NOTE: You must have a GPS heading sensor (compass) installed in order to use the
MEGA 360 Imaging navigation features.
Minn Kota Ultrex
Minn Kota Fortrex
Minn Kota Maxxum
SOLIX Series: SOLIX G2 models
HELIX Series: HELIX MEGA
Imaging+ G3N models
SOLIX Series: SOLIX G2 models
HELIX Series: HELIX MEGA
Imaging+ G3N models
1 Introduction