Power Off - Humminbird MEGA 360 IMAGING Series Installation Manual

Power Off

WARNING! When the boat is stored or at dock, the MEGA 360 Imaging transducer
must be turned off to prevent draining the battery.
Power Off the Control Head
1. SOLIX Series: During operation, tap the top, right corner of the status bar or
press the POWER key, and select Power Off.
HELIX Series: Press and hold the POWER key.
CAUTION! Turning off the control head will NOT power off the MEGA 360
Imaging transducer.
2. Turn off power on the main switch, breaker, or battery switch.
Powering off the MEGA 360 Imaging transducer will be determined by the
installation and power connection on your boat.
Travel with the Pod Installed
1. Confirm the Depth Collar Knob is fully tightened (by hand).
2. The pod must not hit the trolling motor shaft, base, or any objects. This is
also critical during transport or when the trolling motor is stowed. Check the
stability of the trolling motor bracket after initial use and periodically thereafter
to ensure that the installation and lock remain stable.
For measurement requirements, see Install the Trolling Motor Bracket.
35 Power Off