Introduction; Important Information; Humminbird Control Head - Humminbird MEGA 360 IMAGING Operation Manual

Introduction

Thank you for purchasing the Humminbird® MEGA 360 Imaging™ transducer. MEGA 360 Imaging brings the unmatched coverage
of 360 Imaging technology into the megahertz range for next-level detail. We encourage you to read this manual carefully in order
to understand MEGA 360 Imaging and how to use this Humminbird advanced accessory on the water. Some of the equipment
requirements and menu options depend on your control head. Whether you have a SOLIX® or HELIX® fish finder, every effort has
been made to clearly identify those features throughout this manual.

Important Information

Before you use the MEGA 360 Imaging transducer on the water, it is important to understand the following:
Speed
Obstructions
Powering Off
Setting Up the Control
Head

Humminbird Control Head

This accessory manual describes the functionality that is added to your SOLIX or HELIX control head when it is connected to the
MEGA 360 Imaging transducer. For additional information about the Humminbird control head operations, see your control head
operations manual. To download the manual from our Web site, go to humminbird.com.
Compatibility
MEGA 360 Imaging is compatible with all SOLIX models and HELIX G3N models with MEGA+ Imaging. MEGA 360 Imaging can be
shared over Ethernet with all SOLIX models and HELIX G2N and G3N units.
The MEGA 360 Imaging transducer pod can be used in the water at 0 to 7 mph. The
transducer pod should NOT be in the water during high speed travel.
Be aware of obstructions in the water that could damage the transducer pod.
When the boat is at dock or in storage, the MEGA 360 Imaging transducer should be
turned off at the switch to prevent wear and tear. See Power Off for more information.
The control head must be set up correctly to add the MEGA 360 Imaging features to the
Menu System and View Rotation. See Set Up MEGA 360 on the Network and MEGA 360
Imaging Views.
5 Introduction