Update Software; Software Requirements; Check The Current Software Version - Humminbird MEGA 360 IMAGING Series Installation Manual

Hide thumbs Also See for MEGA 360 IMAGING Series:
Table of Contents

Advertisement

Update Software

Your control head model may need a software update to work with the MEGA 360
Imaging transducer. We recommend that you read the following section completely
before starting any software updates.

Software Requirements

• SOLIX G2 Series: 3.520 or higher
• HELIX G3N Series: 2.130 or higher

Check the Current Software Version

It is helpful to review the software version number that is currently installed on the
control head and each accessory.
SOLIX Series
1. Press the HOME key.
2. Select Settings.
3. Select Network > Network Info.
4. The Network Info dialog box shows a section for each device connected to the
network. Scroll to each section to note the software version number listed.
HELIX Series
1. Press and hold the VIEW key.
2. Select System > System Status.
3. Confirm the Software Version listed.
Update Software
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mega 360 fortrexMega 360 ultrex

Table of Contents