Update Accessory Software With An Sd Card - Humminbird MEGA 360 IMAGING Series Installation Manual

Update Accessory Software with an SD Card

You will need an SD or microSD card (depending on your control head model).
1. Install a formatted SD or microSD card into the computer card slot.
2. Go to humminbird.com, and click Support > Software Updates.
3. Scroll down to Accessories and Mapping. The available software updates are
listed as downloads under each accessory product. Confirm your control head
model is listed in the software description.
• Read the notices and instructions, and select Download.
• Follow the on-screen prompts to save the software file to the SD or microSD
card.
4. Insert the SD or microSD card (with the software file) into the control head
card slot.
5. Power on your Humminbird control head. Start Normal mode.
6. The software will be updated automatically. It may take up to two minutes for
the software to be detected on the network, and the control head will display
a dialog box to indicate that the update is in progress.
7. When the software update is complete, remove the SD or microSD card from
the control head card slot.
8. Restart: If you don't have any other software updates to install, power off the
control head, and restart it.
Update Software 6