Humminbird MEGA 360 IMAGING Series Installation Manual page 28

6. Use an Allen wrench (not included) to install the (2) 10-32 x 5/8" hex socket
bolts on the bracket where the pod shaft is installed (see the illustration
Securing the Pod).
Tighten the bolts so the pod shaft is fully secure and won't drop when it is
deployed in the next step. Hand-tighten only!
7. Deploy the Trolling Motor.
Positioning the Bracket
bracket
lock
screws to adjust
lock tension
(optional)
pivot the bracket
to adjust the pod
safety distance
Trolling Motor Bracket
Securing the Pod
pod
shaft
22
trolling motor shaft
hand-tighten (2)
hex socket bolts
10-32 x 5/8"