Humminbird MEGA 360 IMAGING Series Installation Manual page 38

4. Stop Pinging: When you are finished reviewing the operation, tap Ping Off
from the 360 status bar.
HELIX Series
1. Press and hold the VIEW key.
2. Select Sonar > 360 View.
3. The sonar returns from the MEGA 360 scan will begin to display on the
MEGA 360 View. Review the display for the following information and see the
illustration Reviewing the 360 View.
• Bottom: Confirm that the bottom is visible on-screen.
• Blocked Beams: If the beams hit a hard surface, it will appear as bright
white on the display. If the beams are blocked by any objects, move the
objects if possible. You can also adjust the 360 Range on the X-Press Menu
to see more or less detail on the display. In some cases, the trolling motor
will appear on the display as a shadow.
4. Stop Pinging: When you are finished reviewing the operation, press the MENU
key once. Select 360 Pinging, and press the LEFT Cursor key.
trolling motor
shadow
Control Head Setup
Reviewing the 360 View
32
bottom return