Supplies - Humminbird MEGA 360 IMAGING Series Installation Manual

Accessories: Additional recommended accessories include a Heading Sensor
GPS Puck, a Heading Sensor GPS Adapter (SOLIX only), and transducer extension
cables. For the most current list of compatible accessories, visit our Web site at
humminbird.com.

Supplies

In addition to the hardware included with your accessory, you will need the following
supplies:
• Phillips head screwdriver
• Allen wrench
• Hex socket wrench or nut driver
• Cable ties for cable routing
• 1 Amp fuse
Switch (optional): If you do not have a main switch or fuse panel available on your
boat to connect power, you will need to purchase a battery switch. See Install the
Trolling Motor Bracket, Section 3: Route the Cables and Connect Power for
more information.
3 Introduction